Volume 1, A – 218: Stochastic seismic assessment of unreinforced masonry buildings
Author ROTA, M University of Pavia, Department of Structural Mechanics, Pavia PENNA, A European Centre for Training and Research in Earthquake Engineering (EUCENTRE), Pavia MAGENES, G. University of Pavia, Department […]
Volume 1, A – 217: Experimental characterisation of stone masonry mechanical properties
Author MAGENES, G. University of Pavia, Department of Structural Mechanics PENNA, A EUCENTRE, Pavia GALASCO, A. and ROTA, M. University of Pavia, Department of Structural Mechanics Abstract Within an experimental […]
Volume 1, A – 209: Experimental study of the behaviour of masonry walls under lateral loading and comparison with existing design methods
Author HAACH, V. G.; VASCONCELOS, G.; LOURENÇO, P. B.ISISE, Department of Civil Engineering, University of Minho, Azurém, Guimarães, Portugal Abstract This paper aims at presenting results of an experimental program […]
Volume 1, A – 181: The development of masonry reinforced by bond beams to resist lateral load
Author EDGELL, G. CERAM CORBETT, H. Wembley Innovation, UK Abstract The successful use of bond beams to subdivide the area of large walls and enhance their resistance to lateral load […]
Volume 1, A – 179: FEM Analysis of orthotropic masonry walls via localized damage models
Author PELÀ, L. University of Bologna, DICAM Department CERVERA, M. and ROCA, P. Technical University of Catalonia, Department of Construction Engineering Abstract In finite element analysis of masonry structures, continuum […]
Volume 1, A – 176: The theoretical basis of the MEXE method for masonry arch bridge assessment
Author WANG, J. University of the West of England (UK), School of the Built and Natural Environment MELBOURNE, C. University of Salford (UK), School of Computing, Science and Engineering TOMOR, […]
Volume 1, A – 169: Utilization of nano-silica in developing high performance masonry mortars
Author KORANY, Y.; BINDIGANAVILE, V. University of Alberta, Department of Civil and Environmental Engineering Abstract Higher masonry compressive strength values could be reached if the unit-to-mortar modular ratio is reduced […]
Volume 1, A – 118: A FE limit analysis software for FRP-reinforced masonry buildings subjected to horizontal loads
Author MILANI, G. Dipartimento di Ingegneria Strutturale, Politecnico di Milano, Milan, Italy MILANI, E. and TRALLI, A. Department of Engineering, University of Ferrara, Ferrara, Italy Abstract A 3D homogenized FE […]
Volume 1, A – 111: Prestress loss of high-strength calcium silicate element masonry with thin-layer mortar
Author VAN DER MEER, l. J.; MARTENS, D. R. W.; VERMELTFOORT, A. T. Eindhoven University of Technology, Structural Design Abstract At Eindhoven University of Technology, the behaviour of post-tensioned shear […]
Volume 1, A – 108: Glass, a partial replacement of cement in concrete blocks
Author MIHALJEVIC, S. N; McMaster University, Civil Engineering CHIDIAC, S. E; School of Engineering Practice, Civil Engineering, McMaster University Abstract Dry-cast concrete masonry block production utilizes aggregates, which are a […]
Volume 1, A – 105: Variation in shear properties of masonry
Author VERMELTFOORT, A. T. Eindhoven University of Technology, Department Structural Masonry Abstract Simultaneously with building masonry walls for lintel-tests, mortar prisms and shear-triplets were made. About four hundred mortar prisms […]
Volume 1, A – 104: Composite action in CASIEL TLM walls, a literature review and experimental results
Author VERMELTFOORT, A. T. Eindhoven University of Technology, Department Structural Masonry Abstract The paper gives a literature review of studies into the composite action between masonry and supporting beams aimed […]