Volume 1, D – 8: Load tests on masonry wallettes subjected to cyclic shear
Author MOJSILOVIC, N. ETH Zurich, Institute of Structural Engineering, Switzerland SIMUNDIC, G. and PAGE, A. University of Newcastle, Faculty of Engineering and Built Environment Abstract A joint research project by […]
Volume 1, C – 274: Effect of slag content on physical and mechanical properties of lightweight aggregate concrete small hollow blocks
Author JUN, L.; CHANGWEI, X.; RUNQING, L.; HONG, Q. Shenyang Jianzhu University, School of Material Science and Engineering Abstract This paper introduces a method of saving materials and energy through […]
Volume 1, C – 122: Compatibility of masonry components from gas permeability tests
Author WESOLOWSKA, M. University of Technology and Life Sciences Bydgoszcz, Department of Civil Engineering and Building Physics PAWELKOWSKI, K. and KEMPINSKI, M. and KACZMAREK, M. Kazimierz Wielki University, Department of […]
Volume 1, C – 109: The thermal performance of reverse brick veneer in Australian housing
Author PAGE, A.; HANDS, S. A.; MOGHTADERI, B. School of Engineering & Priority Research Centre For Energy, The University of Newcastle, NSW, Australia Abstract Historically, housing systems in Australia have […]
Volume 1, C – 56: Lightened cement mortars with rubber and expanded clay
Author RÍO, M. D.; SANTA CRUZ, J.; GONZÁLEZ, M. School of Building Engineering. Universidad Politécnica de Madrid Abstract In this article the use of waste products, from various industrial sources, […]
Volume 1, C – 55: Increment of thermal insulation capability of ceramic bricks masonry
Author FRANZOY, M.; GORDO, J.; CITRONI, J.; AVENDAÑO, M.; MARCIPAR, A.; GRETHER, R. Universidad Tecnológica Nacional F.R. Santa Fe Abstract In Argentina, the application of ceramic brick masonry of 0.15 […]
Volume 1, C – 25: Thermal performance of masonry building. Case studies
Author POPESCU, R. IPCT STRUCTURI CRAIFALEANU, A. University “POLITEHNICA” Bucharest Abstract The heat loss through the envelope indicates a building’s thermal performance. This is calculated by two computer programs (2D), […]
Volume 1, B – 329: Diagonally compressed AAC block’s masonry – Effectiveness of strengthening using CRFP and GFRP laminates
Author KUBICA, J.; KAUA, M. Silesian University of Technology, Department of Structural Engineering Abstract Modern composite materials, like strips, sheets or bars made of carbon (CRFP) and glass (GRFP) as […]
Volume 1, B – 261: Strengthening of Shear Damaged Historic Masonry Walls
Author CAPOZUCCA, R. Faculty of Engineering, DACS, Università Politecnica delle Marche Abstract The heritage of historic masonry buildings is one of civil engineering’s cultural duties. Small, historical towns in many […]
Volume 1, B – 228: Repair of earth masonry by means of grouting: importance of clay in the rheology of a mud grout
Author SILVA, R. ISISE, University of Minho, Department of Civil Engineering SCHUEREMANS, L. Katholieke Universiteit Leuven, Department of Civil Engineering OLIVEIRA, D. ISISE, University of Minho, Department of Civil Engineering […]
Volume 1, B – 120: Mechanical properties of masonry with environmental degradation
Author BENEDETTI, A. and MARANI, F. University of Bologna, ITALY, DICAM Department RAMALHO, M. University of Sao Paulo, Brazil, Structural Engineering Dept. Abstract The exposure to environmental actions produces several […]
Volume 1, B – 50: Aesthetic design of masonry arch bridges
Author OHLER, A. Leuphana University of Lüneburg, Department of Technical Sciences and Environment KIRSCHNER, U. Leuphana University of Lüneburg, Department of Cultural Sciences Abstract The paper deals with the design […]