ID1401: The behaviour of historical buildings in seismic zones: Three cases of masonry constructive typologies in Valparaiso

HURTADO, MARCELA1 JIMÉNEZ, TATIANA2 1) Architect, Associate Professor, Universidad Técnica Federico Santa María, Department of Architecture, marcela.hurtado@usm.cl 2 ) PhD student Université Paris Diderot – Paris VII, Laboratoire ICT...

ID1422: The use of bricks in the Italian Architecture of late 1930s: references and evocations to Ancient Rome

MAAHSEN-MILAN, ANDREINA1; PIETROGRANDE, ENRICO2 1) Assistant professor, Alma Mater Studiorum, University of Bologna, Department of Architecture, andreina.milan@unibo.it 2) Assistant professor, University of Padua, Department of Civil, Environmental and Architectural...

ID1428: Rehabilitation of the old alcohol factory of Ribeira Grande for the use of the Contemporary Arts Centre of Azores

SOUSA, HIPÓLITO 1 ; BOTELHO, JERÓNIMO 2 1) Hipólito Sousa, SOPSEC, S.A., Portugal, hipolito.sousa@sopsec.pt 2) Jerónimo Botelho, Portugal, jeronimobotelho@gmail.com   This communication describes the rehabilitation of the old alcohol factory of Ribeira Grande, where...

ID1448: Diagnosis of the condition of and a proposal for intervention on for Mondim da Beira Romanesque Bridge

ROUXINOL, GILBERTO A. F. 1; MORAIS, MARIA J. C. 2 1) Assistant Professor, INESC Coimbra & Polytechnic Institute of Viseu, rouxinol@estv.ipv.pt 2) Master in Construction and Rehabilitation Engineering, mariajcmorais@gmail.com   This paper deals with the diagnosis...

ID1473: Literature study on the rate and mechanism of carbonation of lime in mortars

DESPOTOU ELENI1, SCHLEGEL THOMAS2, SHTIZA AURELA3; VERHELST FREDERIK4 1 Ms. DESPOTOU Eleni, European Lime Association, e.despotou@ima-europe.eu; 2 Dr. SCHLEGEL Thomas, EESAC, thomas.schlegel@eesac.eu; 3 Dr. SHTIZA Aurela, European Lime Association,...

ID1478: Characterization of masonry materials of Pavia’s Barracks to diagnose the alterations originated after the rehabilitation works

MENÉNDEZ, ESPERANZA1; ALVARO, ALBA MARÍA2 1) PhD. Industrial Engineer, Head of the Physic-Chemical Test Unit, Institute of Construction Science Eduardo Torroja, emm@ietcc.csic.es 2) Industrial Engineer, Institute of Construction Science Eduardo Torroja,...

ID1499: Waste and productivity of gypsum block partition masonry wall on construction of multi-storey building

ARAÚJO, EWERTON1; LORDSLEEM JR., ALBERTO2 1) Researcher, Polytechnic School of Pernambuco University, Civil Engineering Department, ewertondbma@hotmail.com 2) PhD Associate Professor, Polytechnic School of Pernambuco University, Civil Engineering Department,...

ID1546: Large deformations on a XIIth Century Romanic church at Val d’Aran (Spain)

COSTA, AGUSTÍ1; LLUIS I GINOVART, JOSEP 2; FORTUNY, GERARD3; COLL, SERGIO4 1) PhD candidate, Escola Tècnica superior d’Arquitectura de Reus, Universitat rovira i Virgili, agusti.costa@urv.cat 2) PhD, Escola Tècnica superior d’Arquitectura de Reus, Universitat rovira i...

ID1626: A Study of the Impacts of Calcitic Aggregates on the Properties of Air Lime Mortar

SCANNELL, SARAH1; LAWRENCE, MIKE2; WALKER, PETE3 1) Mrs, University of Bath, Architecture and Civil Engineering, S.Scannell@bath.ac.uk 2) Dr., University of Bath, Architecture and Civil Engineering, M.Lawrence@bath.ac.uk 3) Prof., University of Bath, Architecture and...

ID1628: Workflows in Masonry Construction: Analysis of Labor Requirements

FLOREZ LAURA1, CASTRO-LACOUTURE DANIEL2, GENTRY RUSSELL3 1 Ph.D. Candidate, Georgia Institute of Technology, School of Building Construction, lflorez3@gatech.edu 2 Associate Professor, Georgia Institute of Technology, School of Building Construction,...

ID1024: Influence of the span rise ratio on the capacity of masonry arch bridges

DONAGHY, JOHN1; WANG, JINYAN2; AUGUSTHUS-NELSON, LEVINGSHAN3 1) Mr John Donaghy, University of Salford, School of Computing Science and Engineering, J.J.Donaghy@edu.salford.ac.uk 2) Dr Jinyan Wang, University of Salford, School of Computing Science and Engineering,...

ID1196: Differences brick facade design to horizontal loads between the Spanish and European standards

Brick facades are a construction type, strongly linked to local construction characteristics and methods. In Spain, particularly in Castilla, the facades have been built since the ’80s with Castilian half foot (11.5 cm), resting on the edge of slabs. The design...

ID1232: Contribution of the lime and sand mortar in the process of capillarity water absorption in old brick masonry

LLORENTE, ALFREDO1, CAMINO, SOLEDAD2, LEÓN, JAVIER3, OLIVAR JOSÉ 4 1 Arquitecto, Universidad de Valladolid, Departamento de Construcciones Arquitectónicas I.T. y M.M.C. y T.E. llorente@arq.uva.es, E.T.S. de Arquitectura Avenida de Salamanca 18, 47014 Valladolid,...

ID1260: A simple design model for the diagonal shear of partially grouted concrete masonry panels

OAN, AHMED1; SHRIVE, NIGEL2 1 Post-Doctoral Fellow, University of Calgary, Civil Engineering Department, afoan@ucalgary.ca 2 Professor, University of Calgary, Civil Engineering Department, ngshrive@ucalgary.ca   The diagonal shear resistance of concrete masonry walls...

GEOFF EDGELL1 1) Geoff Edgell, Lucideon UK, geoff.edgell@lucideon.com   The establishment of TC125 in order to produce European Standards for Masonry Products meant that, as these were to be performance based, a series of supporting test methods were required. A...

ID1301: Teaching Concrete Masonry Unit Construction

LUESCHER, ANDREAS1 1) Professor, Bowling Green State University, Ohio, Department of Architecture and Environmental Design, aluesch@bgsu.edu   The Architectural Materials and Systems course at the Bowling Green State University in Ohio pursues the integration of a...

ID1400: Estimation of clay-brick unreinforced masonry compressive strength based on mortar and unit mechanical parameters

LIBERATORE, DOMENICO1; MAROTTA, ALESSANDRA2; SORRENTINO, LUIGI3 1 Professor, Sapienza – University of Rome, Department of Structural and Geotechnical Engineering, domenico.liberatore@uniroma1.it 2 PhD candidate, Sapienza – University of Rome, Department of...

ID1447: The minimum intervention in Built Heritage: comparing the potential role of codes for conservation

ORNELAS, CILÍSIA1, MIRANDA GUEDES, JOÃO2, BREDA-VÁZQUEZ, ISABEL3 1 Architect, FCT Scholarship, PhD student at FEUP, Researcher at CEC and CITTA, cilisia@fe.up.pt 2 Assistant Professor, FEUP – Department of Civil Engineering, CEC – Centre of Studies for...

ID1455: Strength and Elasticity of Thin Joint Hollow Concrete Masonry made with Denseor Lightweight Aggregates

TRAD, A.1, MONFRONT, L.2 1 Civil Engineer PhD, CERIB (Study and Research Centre for the French Concrete Industry), Structures department, a.trad@cerib.com 2 Technical Manager, CERIB (Study and Research Centre for the French Concrete Industry), Products and Markets...

ID1490: Limit Design of Earthquake-Resistant Masonry

DILL, STEVE1; LEPAGE, ANDRES2; FREDERICK, BRAD3; HOCHWALT, JOHN4 (1) Principal, Kpff Consulting Engineers, steved@kpff.com (2) Associate Professor, The University of Kansas, Dept. of Civil, Envir. & Arch Engineering, alepage@ku.edu (3) Research Assistant, The...