VIII Volume 1, D – 150: The Portuguese masonry’s mechanical characterization
Author PAULO PEREIRA, M. F.; AGUIAR, J. B.; CAMÕES, A.; LOURENÇO, P. B. Department of Civil Engineering, School of Engineering, University of Minho, Portugal Abstract The aim of this study […]
Volume 1, D – 147: A biaxial failure criterion for sequentially linear analysis
Author DEJONG, M. J.; HARRISON, S. University of Cambridge, Department of Engineering Abstract In this work, Sequentially Linear Analysis (SLA) is extended to include a biaxial failure criterion to model […]
Volume 1, D – 121: Non linear reticular models for unreinforced and reinforced masonry analyses
Author BENEDETTI, A. Chair of Structural rehabilitation, University of Bologna, ITALY, DICAM Department PELA’, L.University of Bologna, ITALY, DICAM Department RAMALHO, M.3 University of Sao Paulo, BRAZIL, Structural Engineering Dept. […]
Volume 1, D – 100: An evaluation of contact and non-contact lap splices using double pullout and wall specimens
Author AHMED, K.; FELDMAN, L. R. University of Saskatchewan, Department of Civil & Geological Engineering Abstract Six double pullout specimens and two wall splice specimens, all reinforced with 15 mm […]
Volume 1, D – 94: Mechanical behaviour of brick masonry arches strengthened by GFRP sheet and CFRP plates
Author BORRI, A.; CASTORI, G.; CORRADI M. University of Perugia, Department of Civil and Environmental engineering Abstract This paper aims to comparise and illustrate the behaviour of two different FRP […]
Volume 1, D – 93: Behaviour of interlocking grouted brick masonry under cyclic compressive loading
Author E NAZAR, M. NNC Design International, New Delhi, India SINHA, S. N. Department of Civil Engg., Indian Institute of Technology, Delhi, New Delhi, India Abstract An experimental investigation had […]
Volume 1, D – 90: Propagation of elastic waves on stone masonry walls
Author MIRANDA, L. and RIO, J. and GUEDES, J Faculty of Engineering of University of Porto, Civil Engineering Dept. COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract Non-destructive testing […]
Volume 1, D – 76: Experimental evaluation of some mechanical properties of large lightweight concrete and clay masonry and comparison with EC 6 expressions
Author SOUSA, H.; SOUSA, R. Faculty of Engineering, University of Porto – Portugal, DEC, Gequaltec Abstract Reflecting the recent European Directives concerning building energy efficiency, two new envelope type masonry […]
Volume 1, D – 45: Experimental study on the influence of openings and tie columns on masonry walls subjected to cyclic loading
Author MOHAMMAD AGHA, H.; LI, Y.; ASAL SALIH, O.; ZHENG N. Chongqing University, Department of Civil Engineering Abstract This paper presents test results of eight masonry walls, four of them […]
Volume 1, D – 34: Non-destructive test methods in the calcium silicate industry
Author EDEN, W. Forschungsvereinigung Kalk-Sandstein e. V., Hannover, Germany MEYER, G. Bundesverband Kalksandsteinindustrie e. V., Hannover, Germany Abstract Calcium silicate units are highly resistant masonry units, composed of mainly burnt […]
Volume 1, D – 29: Contribution of mortar overlay in the concrete masonry strengthened under axial compression
Author OLIVEIRA, F. L. University of São Paulo, Faculty of Architecture and Urbanism, Department of Architecture Technology HANAI, J. B. University of São Paulo, Sao Carlos School of Engineering, Department […]
Volume 1, D – 20: Strengthening of masonry elements using sprayed strain hardening cement-based composites
Author MECHTCHERINE, V.; BRÜDERN, A.-E.; BUTLER, M. TU Dresden, Institute of Construction Materials Abstract This paper reports the results of a research on the strengthening of masonry by means of […]