Data Processing Methods for the Testing of Full-Scale Post-Tensioned Masonry Walls
Author A. HUIZER and R. L. DAY The University of Calgary, Alberta, Canada Abstract The use of mini-computers can greatly simplify test methods and data acquisition procedures. However, data analysis […]
The Testing of Plain and Prestressed Concrete Blockwork Beams and Walls of Geometric Cross Section
Author M. E. PHIPPS and T. I. MONTAGUE University of Manchester, Institute of Science and Technology Abstract The paper describes full scale tests on four concrete blockwork diaphragm walls, twelve […]
Frost Damage to Masonry Structures and Tests For Frost Resistance
Author Reijo Yla-Mattila Technical Research Centre of Finland Abstract In a Finnish winter there are many freezing and thawing cycles with temperatures at times as low as -30°C. Bricks, mortars […]
Concrete Blocks Compressed Parallel to Bed Face : A Theoretical Study
Author F. M. Khalaf* University of Edinburgh, Scotland Abstract A two-dimensional finite element analysis was used to study the behaviour of unfilled, partially and completely filled single-block specimens and two-block […]
Sampling Criteria for Compressive Strength of Masonry Units
Author R. C. DE VEKEY and R. LOVEGROVE Building Research Establishment, Garston. Abstract Most UK standards for masonry units measure compliance with strength specifications using the mean result of destructive […]
Concentrated Loads on Hollow Masonry – A Pilot Study
Author A. W. PAGE*, N. G. SHRIVE# & E. L. JESSOP# * University of Newcastle, Australia #University ofCalgary, Canada Abstract Masonry design codes typically allow the enhancement of masonry strength […]
The Importance of Accuracy and Precision in the Chemical Analysis of Mortars
Author T. P. LEES Taywood Engineering Limited Abstract Mortars can be chemically analysed to give the exact mix proportions of solid ingredients only when the materials in the mortar are […]
Preparation and Curing of Masonry Specimens
Author DAVID GAIRNS University of Melbourne COLIN ANDERSON and ANTON FRIED South Bank Polytechnic, London Abstract In the U.K. the characteristic flexural strength of masonry may be determined either by […]
Factors Affecting the Flexural Strength of Brick Masonry
Author G. J. EDGELL British Ceramic Research Limited Stoke-on-Trent, England Abstract This review of the literature shows the effects of various factors on the flexural strength of brick masonry. The […]
Lateral Strength From Full-Sized Tests Related to the Flexural Properties of Masonry
Author C. ANDERSON South Bank Polytechnic, London Abstract A unique technique for testing masonry waits under transverse lateral load is described and the results of tests on more than 80 […]
Timber-Framed Houses: Interaction Between Frame and Cladding Brickwork Subject to Lateral Loads
Author R. C.DEVEKEY Building Research Establishment, Watford, England Abstract A full sized model limber-framed house structure has been subject to a static lateral face load simulating long period wind gust […]
Compressive Strength and Stress-Strain Relationships of Brickwork when Stressed in Directions other than Normal to the Bed Face: Part 2
Author S. DAVIES and H. R. HODGKINSON British Ceramic Research Limited Abstract Compressive strength and modulus of elasticity have been determined on brickwork built in four bonds using nine types […]