ID1561: Force-Displacement Model for Confined Masonry Walls with Shear-dominated Failure Mode
YEKRANGNIA, MOHAMMAD1; BAKHSHI, ALI2; GHANNAD, MOHAMMAD ALI3 1 PhD. Candidate, Sharif University of Technology, Department of Civil Engineering, yekrangnia@mehr.sharif.ir 2 Associate professor, Sharif University of Technology, Department of Civil Engineering, […]
ID1611: Stability of Lightweight Masonry Basement Walls for an Out-of-Plane Loading
SAENGER, DOROTHEA1; BRAMESHUBER, WOLFGANG 2 1) Dipl.-Ing., RWTH Aachen University, Institute of Building Materials Research, saenger@ibac.rwth-aachen.de 2) Professor Dr.-Ing., RWTH Aachen University, Institute of Building Materials Research, brameshuber@ibac.rwth-aachen.de The […]
ID1027: Fire resistance of vertically perforated clay unit masonry
MEYER, UDO1 1) Dr.-Ing., Arbeitsgemeinschaft Mauerziegel e. V., meyer@ziegel.de The paper gives a short overview about the fire resistance requirements in Germany and the contents of the German National […]
ID1229: Rehabilitation walls of ancient buildings, meeting the thermal requirements and maintaining the architectural façades
PEREIRA, VASCO1; FREIRE, CRISTINA2; SILVA, LUIS3; VIEIRA, NUNO4 1) Façade and ETICS Product Manager, Saint-Gobain Weber Portugal, vasco.pereira@saint-gobain.com 2) Exclay Product Manager, Saint-Gobain Weber Portugal, cristina.freire@saint-gobain.com 3) Marketing Manager, Saint-Gobain […]
ID1231: Additions of Cactus fibers in lime mortars for architectural heritage restoration
ARREOLA-SÃNCHEZ, MAURICIO1; MARTÃNEZ MOLINA, WILFRIDO2; ALONSO GUZMÃN, ELIA MERCEDES3; CHÃVEZ GARCÃA, HUGO LUIS4; LARA GÓMEZ, CINDY5; TORRES ACOSTA, ANDRÉS ANTONIO6; BEDOLLA ARROYO, JUAN ALBERTO7. 1Mastery . Faculty of Civil Eng., […]
ID1274: Modelling time-to-cracking in brick masonry with corroding bed joint reinforcement
LARSSON, OSKAR1; MOLNÃR, MIKLOS2 1) PhD., Lund University, Structural Engineering, oskar.larsson@kstr.lth.se 2) Assistant Prof., Lund University, Structural Engineering, miklos.molnar@kstr.lth.se Clay brick facades often include bed joint reinforcement, especially over […]
ID1330: Spatial variability and stochastic strength prediction of unreinforced masonry walls in horizontal bending
LI, JIE1; STEWART, MARK G2; MASIA, MARK J3; LAWRENCE, STEPHEN J4 1) PhD Student, Centre for Infrastructure Performance and Reliability, The University of Newcastle, NSW, 2308, Australia c3124120@uon.edu.au (corresponding author) […]
ID1411: Modelling masonry arches under fire
FANTILLI, ALESSANDRO P.1; CHIAIA, BERNARDINO2 1) Assistant Professor, Politecnico di Torino, Department of Structural Building and Geotechnical Engineering, alessandro.fantilli@polito.it 2) Professor, Politecnico di Torino, Department of Structural Building and Geotechnical […]
ID1540: Tie-columns effect on the performance of confined brick walls due to cyclic lateral loads
BOURZAM ABDELKRIM1, IKEMOTO TOSHIKAZU2, FUKADA SAIJI2, MIYAJIMA MASAKATSU3 1 Assoc. Prof., Univ. of Scs and Technology, H-Boumediene, Algiers, Civil Engr. Faculty and LBE lab., bourzam@gmail.com. 2 Assoc. Prof., Dept. of […]
ID1563: Digital Image Correlation Technique for Damage State Quantification in Concrete Block Masonry Buildings
ASHOUR, AHMED1; HEEREMA, PAUL2; SHEDID, MARWAN3; EL-DAKHAKHNI, WAEL4 1) Ph.D. Candidate, Dept. of Civil Engineering, McMaster University, Hamilton, L8S 4L7, Ontario, Canada. E-mail: ashouraa@mcmaster.ca 2) Ph.D. Candidate, Dept. of Civil […]
ID1571: Wall tie research for existing and new structures; Literature Study
KOBESEN, M.G.1; VERMELTFOORT, A.T.2.; MULDERS, S.G.C.3 1) Master Student (BSc.), Eindhoven University of Technology, Department of Structural Design, m.g.kobesen@student.tue.nl 2) Associate Professor (Dr.), Eindhoven University of Technology, Department of […]
ID1082: Masonry Building in Pernambuco – Brazil: Current Situation and Perspectives
SILVA, F. A. N.1; OLIVEIRA, R. A.2; SOBRINHO, C. W. P.3 1) Professor, Catholic University of Pernambuco, Science and Technology Centre, farturnog@gmail.com 2) Professor, Catholic University of Pernambuco, Science and […]