Volume 1, D – 206: An experimental investigation of retro-reinforced clay brick arches
Author GARRITY, S. W. Architectural Engineering, School of Civil Engineering, University of Leeds, UK ASHOUR, A. F. School of Engineering, Design & Technology, University of Bradford, UK CHEN, Y. Garrad […]
Volume 1, D – 201: A review of a dynamic test loading pattern for in-plane masonry experiments
Author NICHOLS, J. M. TAMU, Construction Science Department TOTOEV, Y. Z. The University of Newcastle, The Center for Infrastructure Performance and Reliability Abstract This project focuses on the evolution of […]
Volume 1, D – 200: In-plane shake table testing of partially-grouted reinforced concrete masonry walls
Author SAIEDI, H.; LISSEL, S. L. University of Calgary, Department of Civil Engineering Abstract The performance of four partially-grouted reinforced concrete masonry shear walls in response to in plane seismic […]
Volume 1, D – 199: In-plane shear test method for reinforced concrete masonry and preliminary test results
Author DICKIE, J. E.; LISSEL, S. L. University of Calgary, Department of Civil Engineering Abstract As design provisions for masonry are based largely on empirical relationships derived from experimental results, […]
Volume 1, D – 198: Flat-Jack tests on stone masonry walls made of large granite blocks
Author MIRANDA, L. and GUEDES, J. and COSTA, C. and ALMEIDA, C. Faculty of Engineering of University of Porto, Civil Engineering COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract […]
Volume 1, D – 197: The influence of material characteristics on the mechanical behaviour of stone masonry walls
Author ALMEIDA, C. and COSTA, C. Q. and GUEDES, J. and ARÊDE, A. and COSTA, A. A. Faculty of Engineering of University of Porto, Civil Engineering COSTA, A. University of […]
Volume 1, D – 186: Geometrical and mechanical characterization of one leaf stone masonry
Author ALMEIDA, C. and GUEDES, J. and ARÊDE, A. Faculty of Engineering of University of Porto, Civil Engineering Dept. COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract The study […]
Volume 1, D – 170: In-situ airbag testing of unreinforced masonry walls
Author DERAKHSHAN, H.; LUMANTARNA, R.; DIZHUR, D.; INGHAM, J. M. Department of Civil and Environmental Engineering, University of Auckland Abstract A field testing programme was developed to investigate the out-of-plane […]
Volume 1, D – 168: Long term effects of floods on masonry walls: NDTs to measure the drying rate
Author BINDA, L.; CARDANI, G.; CANTINI, L.; TIRABOSCHI, C. Department of Structural Engineering, Politecnico di Milano, Italy Abstract Floods often occur in Italy and inundate masonry buildings. To examine the […]
Volume 1, D – 159: In-plane shear behaviour of masonry panels strengthened with stainless steel high stress reinforcement
Author MASIA, M. and PETERSEN, R. and KONTHESINGHA, C. The University of Newcastle, Centre for Infrastructure Performance and Reliability LAHRA, J. Helifix (Australia) Pty Ltd, Alexandria Abstract An experimental study […]
Volume 1, D – 158: Cyclic in-plane shear behaviour of unreinforced masonry panels retrofitted with fibre reinforced polymer strips
Author KONTHESINGHA, C. and MASIA, M. and PETERSEN, R The University of Newcastle, Centre for Infrastructure Performance and Reliability MOJSILOVIC, N. Institute of Structural Engineering, ETH Zurich, Switzerland SIMUNDIC, G. […]
Volume 1, D – 157: Assessing the validity of rocking in URM perforated shear walls
Author KNOX, C.; MA, Q.; INGHAM, J. M. University of Auckland, Department of Civil and Environmental Engineering Abstract The validity of implementing a ‘rocking wall retrofit’ for New Zealand’s earthquake […]