Volume 2, E – 312: Calibration of partial safety factors for masonry panel design considering creep and damage
Author KIM, J. J.; REDA TAHA, M. M. University of New Mexico, Department of Civil Engineering Abstract The collapse of a historical masonry structures in Europe in the late 1990’s, […]
Volume 2, E – 310: Standardization of earth blocks in Germany
Author ZIEGERT, C. and MÜLLER, U. BAM Federal Institute for Materials Research and Testing, Division VII. RÖHLEN, U. Claytec e. K., Distribution and Technology Abstract The experience with the application […]
Volume 2, E – 267: The ‘Code For Sustainable Homes’: Maximising the ratings with AAC masonry
Author FUDGE, C. H+H UK Limited, UK Abstract In 2006, the UK Government published a Code for Sustainable Homes, intended as a single national standard to guide the housebuilding industry. […]
Volume 2, E – 151: The new Brazilian Clay Masonry Code – 2nd part: Execution and Site Control
Author DA SILVA, R. M. Federal University Of Minas Gerais, Department of Structures CORRÊA, M. R. S.2 School of Engineering of São Carlos – USP, Department of Structures Abstract This […]
Volume 2, E – 152: The new Brazilian Clay Masonry Code – 1st part: Design.
Author CORREA, M. R. S. University of Sao Paulo, Department of Structural Engineering DA SILVA, R. M.2 Federal University of Minas Gerais, Department of Structural Engineering Abstract This paper presents […]
Volume 2, E – 63: Design of walls subjected to combined loading according to EN 1996-1-1
Author CHRISTIANSEN, P. Danish Technological Institute Abstract Combined loading is defined as walls subjected to vertical and horizontal out-of-plane loading. These walls are typically three- or four-sided supported and with […]
Volume 2, E – 33: Rules for large size calcium silicate elements in DIN 1053 and Eurocode 6
Author SCHLUNDT, A. Bundesverband Kalksandsteinindustrie eV, Head of Standardisation Department, Hannover, Germany Abstract Large size calcium silicate elements (masonry units with nominal heights from 498 mm to 648 mm and […]
Volume 1, D – 332: Earthquake resistance of a terraced house – Verification of a new design approach via comparison with test results
Author KRANZLER, T. Bundesverband der Deutschen Ziegelindustrie, Bonn, Germany Abstract The paper deals with the verification of a new design approach for shear stressed masonry structures. Therefore the results of […]
Volume 1, D – 331: Pseudo-dynamic tests on a full scale masonry building
Author MEYER, U. Arge Mauerziegel, Bonn, Germany Abstract A full scale unreinforced masonry terraced house has been subjected to pseudo-dynamic tests to verify the resistance against earthquake loads in areas […]
Volume 1, D – 327: Mechanical properties of clay brick masonry bound with hydraulic limes and hydrated calcium lime
Author COSTIGAN, A.; PAVIA, S. Trinity College Dublin, Department of Civil, Structural and Environmental Engineering Abstract Due to their physical and chemical properties, mortars made with lime are considered to […]
Volume 1, D – 326: Production and testing of scale concrete blocks
Author BANTING, B.; HEEREMA, P.; EL-DAKHAKHNI, W. McMaster University, Department of Civil Engineering Abstract The acquisition of a Variable Scale Concrete Block Production Machine by McMaster University will facilitate the […]
Eurocode for Masonry, EN 1996-1-1 and EN 1996-2: Guidance and worked examples. ISBN 1759-1287
Eurocode for Masonry, EN 1996-1-1 and EN 1996-2: Guidance and worked examples. NOTE: This document is superseded by the 2nd edition which is available as an electronic document