Thin Layer Concrete Blockwork in Flexure
Author O.J. KANYETO, MBIE, MIMS (1) and A.N. FRIED, BSc, MSc, PhD, CEng., MICE, FIMS (2) (1) Department of Civil Engineering, University of Botswana, Gaborone, Botswana (2) Department of Civil […]
Influence of Sand Classification and Hydrated Lime Use on the Resistance of Structural Masonry Concrete Blocks
Author ALEXSANDRO S. FELIPE (1), JEFFERSON S. CAMACHO (2), MARIA C.F. ALBUQUERQUE (1), RODRIGO P. ANDOLFATO (2) (1) Sao Paulo State University (UNESP), Ilha Solteira – Civil Engineering Department. Brazil […]
Compressive Strength Behavior of Plastic Fibre Reinforced Soil Specimens Manufactured Under Varying Moulding Loads
Author C.K. SUBRAMAIA PRASAD (1), E.K. KUNHANANDAN NAMBIAR (2), B. MATHEWS ABRAHAM (3) (1) Research Scholar, School of Engineering, CUSAT, Cochin-22, cksp55@gmail.com (2) Department of Civil Engineering, N S S […]
Compressive Strength of Brick Masonry Made With Weak Mortars
Author E.S. PEDERSEN and K.F. HANSEN Danish Building Research Institute, DK-2970 Hørsholm, Denmark Abstract The use of weak mortar has a number of advantages (e.g. elimination of expansion joints, environmental […]
Yield surface of a zero-tension rectangular masonry section subjected to an eccentric compressive force
Author C. Anselmi and E. Saetta Dipartimento di Costruzioni e Metodi Matematici in Architettura, Università Federico II, Naples, Italy Abstract This research paper examines masonry subject to limited compressive stress […]
The Use of High Performance Thin Joint Adhesive Technology. Carnival Arts Centre, 3 St Mary’s Road, Luton LU1 3JA – A Case Study
Author C. ASH (1) and P. ROGATZKI (2) (1) Principle, Ash Sakula Architects, 5-9 Hatton Wall, London EC1N 8HX (2) Head of Design & Technical Services, Hanson Material Products, Atherstone […]
The Mosta Rotunda Dome in Malta
Author D. POLIDANO (1) and A.N. FRIED (2) (1) Project Manager, Structural and Civil Engineering Consultant, Malta (2) Senior Lecturer, University of Surrey, Guildford, UK Abstract This paper examines the […]
Estimate of Concrete Block Texture using Image Analysis
Author A.S. FELIPE (1), J.S. CAMACHO (2), M.C.F. ALBUQUERQUE (3), R.P. ANDOLFATO (4) (1), (3) São Paulo State University (UNESP), Ilha Solteira – Civil Engineering Department, Brazil (2), (4) Structural […]
An Interim Investigation into Pore Formation in Masonry Mortar and the Use of Microscopy to Investigate the Probable Initial Air Content
Author N. BENINGFIELD (1), N. WINTER (2) and S. FARRELL (3) (1) Neil Beningfield & Associates Ltd., UK (2) WHD Microanalysis Consultants Ltd., UK (3) CPI Ltd, Republic of Ireland […]
Mix Optimization for Concrete Block Manufacture in India
Author K. NAGENDRA PRASAD (1), M.L. NARASIMHULU (2) and R. MANOHARA REDDY (3) (1) Professor of Civil Engineering, College of Engineering, Sri Venkateswara University,Tirupati, 507512, India (2) Associate Professor in […]
Structural Masonry Bedding Mortar Composed of Crushed Brick Fine Aggregates
Author A.L. OLIVEIRA (1), L.C. ZAMPIRON (1), R.A. SOUZA (1), J.M. CASALI (2) and L.R. PRUDÊNCIO JR. (3) (1) Federal Institute of Santa Catarina – IFSC, Florianópolis/SC – Brasil (2) […]
MI Volume 1
MI Volume 1 Complete Edition Masonry International Volume 1 May-Dec 1987 Complete Edition