Volume 2, F – 177: High-cycle fatigue behaviour of brick masonry: A review
Author WANG, J. and TOMOR, A. University of the West of England (UK), School of the Built and Natural Environment MELBOURNE, C. University of Salford (UK), School of Computing, Science […]
Volume 2, F – 162: Response of full-scale walls subjected to out-of-plane soft impact loads
Author RAGHUNATH S. BMS College of Engineering, Bangalore, Department of Civil Engineering NANJUNDA RAO K S. Indian Institute of Science, Bangalore, Department of Civil Engineering JAGADISH K. S.3 RV College […]
Volume 2, F – 143: Mechanical properties of tuff and calcarenite stone masonry panels under compression
Author MARCARI, G. University of Minho, ISISE, Department of Civil Engineering, Portugal FABBROCINO, G. University of Molise, Strega Laboratory, Italy LOURENÇO, P. B. University of Minho, ISISE, Department of Civil […]
130: Crack prediction of external renderings on masonry walls
Author SAENGER, D.; BRAMESHUBER, W. RWTH Aachen University, Institute of Building Materials Research Abstract Fresh renderings applied to substrate lose water by suction and evaporation and start shrinking, simultaneously hardening […]
Volume 2, F – 127: Parametric analysis of in plane loaded reinforced clay unit masonry walls
Author GUIDI, G.; MOSELE, F.; DA PORTO, F.; MODENA, C. University of Padova, Department of Structural and Transportation Engineering Abstract The mechanical behavior of a reinforced masonry system made with […]
Volume 2, F – 124: Problems related to grout injection of heritage buildings walls
Author URANJEK, M. Building and Civil engineering Institute ZRMK, Centre for Materials and Structures, Ljubljana, Slovenia ŽARNIC, R. and BOKAN-BOSILJKOV, V. and BOSILJKOV, V. University of Ljubljana, Faculty of Civil […]
Volume 2, F – 117: Delamination of FRP strips glued to masonry columns: a numerical insight
Author MILANI, G.; FEDELE, R. Politecnico di Milano, Dipartimento di Ingegneria Strutturale, Milan Abstract In this communication a heterogeneous model at the meso-scale for the interpretation of the In this […]
Volume 2, F – 116: Performance assessment of pumice aggregate concrete block walls
Author KUS, H. and EDIS, E. Istanbul Technical University, Faculty of Architecture GÖCER, Ö. and ÖZKAN, E. Beykent University, Faculty of Engineering and Architecture Abstract Pumice aggregate concrete hollow wall […]
Volume 2, F – 107: Calculation with a spreadsheet of wind load distribution over shear walls
Author VERMELTFOORT, A. T.; MARTENS, D. R. W. Eindhoven University of Technology, Department Structural Masonry Abstract One of the problems of interest in the seismic or wind design of masonry […]
Volume 2, F – 95: Seismic behaviour of confined autoclaved aerated concrete masonry buildings: A shaking table study
Author TOMAŽEVI, M.; GAMS, M. Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia Abstract The seismic behaviour of typical residential confined masonry buildings constructed with aerated autoclaved concrete (AAC) […]
Volume 2, F – 68: Numerical analysis of masonry structures
Author SZOJDA, L. Silesian University of Technology, Department of Structural Engineering Abstract The behaviour of a masonry wall subjected to shear stress is presented in this paper. Masonry walls are […]
Volume 2, F – 3: Simple analyses of complex masonry structures. Achieving understanding in place of doubtful
Author HARVEY, B. Bill Harvey Associates Ltd Abstract There is a growing tendency to turn to finite elements as a panacea of analysis. The author’s experience is that, even when […]