ID1311: Testing and modelling of seismic connector for traditional masonry walls
FRANCO DI FABIO11; LORENZO FANALE2; MATTEO TOTANI3 1) Researcherst Department of Civil Engineering, franco.difabio@univaq.it 2) Assistant researcher nd Department of Civil Engineering, lorenzo.fanale@yahoo.it 3) Phd student nd Department of Civil […]
ID1314: Compressive Capacity and Behaviour of Concrete and Ceramic Masonry Prisms
FONSECA, FERNANDO S. 1, ROMAN, HUMBERTO R. 2, MOHAMAD, GIHAD3, MENDES, RICARDO J. K.4, ROMAGNA, ROMSON H.5 1) Associate Professor, Brigham Young University, Civil & Environmental Department, ffonseca@et.byu.edu 2) Associate […]
ID1315: Lightweight Masonry Grout made with Expanded Shale
TANNER, ALLISON1; FONSECA, FERNANDO S.2 1) Graduate Student, Brigham Young University, Civil & Environmental Engineering Department, allison8tanner@gmail.com Lightweight aggregate has been used successfully for structural and non-structural applications, and […]
ID1320: Possible weathering of the brick matrix when exposed to water with different pH
RÖRIG-DALGAARD, INGE1 1) Post doc, Technical University of Denmark, Department of Civil Engineering, ird@byg.dtu.dk The main reasons for deterioration of bricks are frost, crystallization pressure and chemical exposure. Despite […]
ID1321: Natural hydraulic lime mortars with ceramic wastes for masonry
FARIA, PAULINA1; SILVA, VITOR2; MADEIRA, TIAGO3 1) Associate Professor, NOVA University of Lisbon, Department Civil Engineering, UNIC, paulina.faria@fct.unl.pt 2) Research Fellow, NOVA University of Lisbon, Department Civil Engineering, vmd.silva@fct.unl.pt 3) […]
ID1327: Microstructural Characterization of Phases and Interfaces of Portland Cement Mortar Using High Resolution Microscopy
BARRETO, MATHEUS DE FARIA E OLIVEIRA1, BRANDÃO, PAULO ROBERTO GOMES2 1PhD, Universidade Federal de Minas Gerais, PPGEM, Belo Horizonte, Brasil, matheusfob@yahoo.com.br. 2PhD, Professor, Universidade Federal de Minas Gerais, DEMIN, Belo […]
ID1328: Micro and Nanostructural Characterization of Surfaces and Interfaces of Portland Cement Mortars Using Atomic Force Microscopy
BARRETO, MATHEUS DE FARIA E OLIVEIRA1, BRANDÃO, PAULO ROBERTO GOMES2, 1PhD, Universidade Federal de Minas Gerais, PPGEM, Belo Horizonte, Brasil, matheusfob@yahoo.com.br. 2PhD, Professor, Universidade Federal de Minas Gerais, DEMIN, Belo […]
ID1329: Study of the block/grout interface in concrete block masonry structures
IZQUIERDO, ORIETA SOTO1; CORRÊA, MÃRCIO ROBERTO SILVA2; 1) PhD Student, EESC – University of São Paulo, Department of Structural Engineering, orieta@sc.usp.br 2) PhD, Associate Professor, EESC – University of São […]
ID1345: Simulation results of cracking in point loaded masonry compared with experimental results.
VERMELTFOORT, A.T. 1 1) Associate Professor, Eindhoven University of Technology, Structural masonry department, a.t.vermeltfoort@tue.nl Masonry is point loaded when a longitudinal center strip is positioned between wall and floor […]
ID1346: The influence of hardening conditions on the properties of masonry cement mortar prisms made in brick moulds
BERTRAM, GABI1 1) Assistant Professor, Eindhoven University of Technology, Netherlands, Department of Masonry Structures, g.bertram@tue.nl One aspect of our investigation into the spacing of movement joints involved the short […]
ID1347: Influence of the freeze and thaw in the durability of granites used in vernacular masonry buildings
MARTINS, LURDES1; VASCONCELOS,GRAÇA2;LOURENÇO, PAULO3;PALHA, CARLOS4 1) PhD student, ISISE, Department of Civil Engineering, University of Minho, 4105@civil.uminho.pt 2) Assistant Professor, ISISE, Department of Civil Engineering, University of Minho, graca@civil.uminho.pt 3) […]
ID1348: In-situ testing of stone masonry: a review of the state of the art
MARTINS, LURDES1; VASCONCELOS, GRAÇA2; LOURENÇO, PAULO3 1) PhD student, ISISE, Department of Civil Engineering, University of Minho, 4105@civil.uminho 2) Assistant Professor, ISISE, Department of Civil Engineering, University of Minho, graca@civil.uminho.pt […]