S07 679: BASILICA CHURCHES UNDER SEISMIC ACTIONS: CLASSIFICATION AND NON-LINEAR BEHAVIOUR OF MASONRY MACRO-ELEMENTS

G. Brandonisio and A. De Luca Department of Structures for Engineering and Architecture (Di.St.), University of Naples “Federico II” P.le Tecchio, 80 – 80125 Naples (Italy) {giuseppe.brandonisio,adeluca}@unina.it Keywords: Masonry, Basilica churches,...

S08 084: PERFORMANCE OF MASONRY UNITS PREPARED USING CONSTRUCTION AND DEMOLITION WASTE AS FINE AGGREGATES

Ashwin M Joshi1, S.M. Basutkar2, Mangala Keshava3, S. Raghunath3, and K.S. Jagadish4 1)  Research Scholar, Dept. of Civil Engineering, BMS College of Engineering, Bengaluru (India) e-mail: ashwinmjoshi@gmail.com 2)  Asst. Professor, Dept. of Civil Engineering, R V...

S08 203: PRELIMINARY STUDY ON USE OF CRUMB RUBBER TYRE WASTE IN THE PREPARATION OF COMPRESSED STABILIZED EARTH BLOCKS

Honne B Nagaraj1, Ashwin M. Joshi2, and Niranjan A. Karamadi3 1)  Professor of Civil Engineering, B.M.S. College of Engineering, Bangalore, India e-mail: drhbn.civ@bmsce.ac.in 2)  Research Scholar, Dept. of Civil Engineering, BMS College of Engineering, Bangalore,...

S08 417: DEVELOPMENT OF ENERGY EFFICIENT MASONRY SYSTEM

R. Sousa 1, H. Sousa 1, L. Silva 2, I. Flores-Colen 3 and M. Pedroso 3 1)  CONSTRUCT – Faculty of Engineering University of Porto Rua Dr. Roberto Frias, s/n 4200-465 Porto (Portugal) e-mail: ruysousa@fe.up.pt 2)   Saint-Gobain Weber Zona Industrial da Taboeira...

S08 443: INVESTIGATION OF SUSTAINABLE SELF-CONSOLIDATING GROUT AND RECONSOLIDATION

Craig V. Baltimore1, and Kurt Siggard2 1)  Dept. of Architectural Engineering, California Polytechnic State University – San Luis Obispo 1 Grand Ave, San Luis Obispo, California, U.S.A., 93407 e-mail: cbaltimo@calpoly.edu 2)  Concrete Masonry Association of...

S08 540: SPECIFIC ENVIRONMENTAL CONTRIBUTION OF THE CONCRETE MASONRY IN BUILDINGS: THE FRENCH APPROACH

Lionel Monfront1, Nicolas Decousser2 1)  CERIB (Precast Concrete Industry Research Centre) CS 10010, 28233 Epernon Cedex, France e-mail: l.monfront@cerib.com 2)  CERIB (Precast Concrete Industry Research Centre) CS 10010, 28233 Epernon Cedex, France...

S08 670: A SYSTEMATIC STUDY OF THE EFFECTS OF LIME-CEMENT RATIO IN THE MECHANICAL PROPERTIES OF BLENDED MORTARS

Meera Ramesh1, Miguel Azenha1, and Paulo B. Lourenço1 1)  Department of Civil Engineering, ISISE Universidade do Minho, Portugal rmeera.93@gmail.com, miguel.azenha@civil.uminho.pt, pbl@civil.uminho.pt Keywords: Lime-cement blended mortars, mechanical properties,...

S09 118: AN EXPERIMENTAL TEST SETUP TO DETERMINE THE VAPOUR PERMEABILITY OF BRICK MASONRY

Evy Vereecken1, Wouter Van De Walle1, and Staf Roels1 1)  KU Leuven, Department of Civil Engineering, Building Physics Section Kasteelpark Arenberg 40, B-3001 Leuven, Belgium e-mail: {Evy.Vereecken, Wouter.Vandewalle, Staf.Roels}@kuleuven.be Keywords: Masonry, vapour...

S09 164: COMPARATIVE ANALYSIS BETWEEN TUSCAN AND PORTUGUESE TRADITIONAL MASONRIES: QUALITATIVE AND MECHANICAL CHARACTERISATION

Sonia Boschi1, Tiago Miguel Ferreira2, Romeu Vicente3, and Andrea Vignoli1 1)  DICEA, Department of Civil and Environmental Engineering Via di Santa Marta 3, 50139 Firenze, Italy e-mail: {sonia.boschi,andrea.vignoli}@unifi.it 2)  ISISE, Department of Civil Engineering...

S09 382: BOND STRENGTH DEVELOPMENT BETWEEN AAC, TRADITIONAL AND THIN LAYER MORTARS AT AMBIENT AND SUB-ZERO TEMPERATURES AND THE IMPACT OF ICE-BOND.

Graham. R. Sargeant1 1)  H+H UK Ltd, Celcon House, Ightham, Sevenoaks, Kent TN15 9HZ United Kingdom e-mail: graham.sargeant@hhcelcon.co.uk Keywords: Bond, Wrench, AAC, Mortar, Ice, Temperature. Abstract. Investigation into bond strength development between Autoclaved...

S09 396: EXPERIMENTAL STUDY OF CONCRETE MASONRY INFILLED RC FRAMES UNDER OUT-OF-PLANE LOADING

R. Sepasdar 1, C.Y. Wang 2, and Y. Liu3 1,2,3 Dept. of Civil and Resource Engineering, Dalhousie University, Halifax (Canada) e-mail: reza.sepasdar@dal.ca; chongyang.wang@dal.ca; yi.liu@dal.ca Keywords: masonry infilled RC frame, out-of-plane behaviour, arching...

S09 407: INFLUENCE OF THE LAYERS DIRECTION ON THE PHYSICALMECHANICAL PROPERTIES OF FRESHWATER LIMESTONE (MUDSTONE)

N. Ademović1, A. Kurtović1, and N. Kadrić2 1Associate professor, Faculty of Civil Engineering, University of Sarajevo Patriotske lige 30. 71 000 Sarajevo, Bosnia and Herzegovina naidadem@yahoo.com, azra.kurtovic1@gmail.com 2 Master of Science, Geo Lab Mustafe Bajića...

S09 409: THERMAL TESTING OF ALTERNATIVE MASONRY WALLS

Wibke I. De Villiers1, Calvin L. Pagel2, Chad Robins2 and Brian Potgieter2, William P. Boshoff2 1)  Department of Civil Engineering, Stellenbosch University Private Bag X1, Matieland, 7602, South Africa e-mail: wdv@sun.ac.za 2)  Department of Civil Engineering,...

S09 410: EXPERIMENTAL INVESTIGATION ON THE STRUCTURAL RESISTANCE OF MASONRY WALLS INCLUDING A THERMAL BREAK LAYER

M. Deyazada1, B. Vandoren2, H. Degee3 1Construction Engineering Research Group, Faculty of Engineering Technology, Universiteit Hasselt Diepenbeek B3590, Belgium e-mail: {mohammed.deyazada, bram.vandoren, herve.degee}@uhasselt.be Keywords: Hybrid masonry walls, Load...

S09 416: FATIGUE DEGRADATION OF REFRACTORY MASONRY MATERIALS – STRESS-STRAIN MEASUREMENTS AND ACOUSTIC EMISSION ANALYSIS

K. Andreev1, N. Shetty2, E. Verstrynge2 1)  Ceramics Research Centre, Tata Steel, Velsen Noord, The Netherlands e-mail: Kirill.Andreev@tatasteel.com 2)   Department of Civil Engineering, KU Leuven, Belgium e-mail: Naveen.Shetty@kuleuven.be Els.Verstrynge@kuleuven.be...

S09 422: FRESH AND HARDENED PROPERTIES OF VARIOUS CEMENT AND CEMENT-LIME MASONRY MORTARS

Julian. A. Thamboo1, Amith A. Bandara2, and Rashitha N. Jayarathne2 1)  Senior Lecturer, Department of Civil Engineering, South Eastern University of Sri Lanka, 32360 Oluvil, Sri Lanka, jathamboo@seu.ac.lk 2)  Temporary Lecturer, Department of Civil Engineering, South...

S09 440: FASTENING OF WINDOWS IN VERTICALLY PERFORATED THERMAL INSULATING CLAY UNIT MASONRY WITH REQUIREMENTS ON BURGLAR RESISTANCE

A. Frank1, U. Meyer2, J.H. Küenzlen3, S. Haut4, and N. Sack4 1)  PaX AG Neuweg 7, 55218 Ingelheim, Germany a.frank@pax.de 2)   Arbeitsgemeinschaft Mauerziegel im Bundesverband der Deutschen Ziegelindustrie e.V. Reinhardtstraße 12-16, 10117 Berlin, Germany...

S09 453: THE QUALITY OF WALL ELEMENT JUNCTION WITH MORTAR AS THE BASIC CONDITION FOR STRUCTURAL INTEGRITY OF FACING WALL

M. Wesołowska1 1)  UTP University of Science and Technology Al. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland e-mail: marysia@utp.edu.pl Keywords: Face wall, masonry mortar, structural integrity, clinker brick. Abstract. Proper functioning of a facing wall in external...

S09 462: EXPERIMENTAL EVALUATION OF AN INTERLOCKING MASONRY UNIT WALL SYSTEM

Claire B. Thomson1, Brad D. Weldon2, and Kevin Q. Walsh3 1)  Project Engineer, Enayat Schneider Smith Engineering, Inc., Denver, Colorado, USA and formerly Graduate Engineering Research Assistant, New Mexico State University, Las Cruces, New Mexico, USA e-mail:...

S09 472: EXPERIMENTAL EVALUATION ON THE PERFORMANCE OF MASONRY AT ELEVATED TEMPERATURES

Josipa Bošnjak1, Akanshu Sharma2, Amra Mešković1 and Marina Stipetić1 1)  Materials Testing Institute, University of Stuttgart Pfaffenwaldring 4c, 70569 Stuttgart, Germany e-mail: {josipa.bosnjak, amra.meskovic, marina.stipetic}@mpa.uni-stuttgart.de; 2)  Institute of...