S11 563: FRAGILITY ANALYSIS OF MASONRY STRUCTURAL UNITS BY RESPONSE SURFACE METHOD

Lidia Battaglia1, Nicola Buratti1, Marco Savoia1 1)  Dept. of Civil, Chemical, Environmental and Materials Engineering, University of Bologna Viale del Risorgimento 2, 40136 Bologna, Italy e-mail: {lidia.battaglia2, nicola.buratti, marco.savoia}@unibo.it Keywords:...

S11 585: IDENTIFYING AVAILABLE GUIDELINES FOR MASONRY ARCH BRIDGE DESIGN INTERNATIONALLY

  Adrienn K. Tomor1 1) University of the West of England Coldharbour Lane, Frenchay Campus, Bristol, BS16 1QY, UK e-mail: adrienn.tomor@uwe.ac.ukAffiliation Keywords: Masonry arch bridges, state of art, review, guidelines, codes of practice, strategic approach...

S11 645: DEVELOPMENT OF SEISMIC FRAGILITY CURVES FO

Jelena Milosevic1, Rita Bento1,and Serena Cattari2 1)  CERIS, ICIST, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal address: Av. Rovisco Pais 1049-001 Lisboa, Portugal e-mail: {jelena.milosevic,rita.bento}@tecnico.ulisboa.pt 2)  Dept. of Civil,...

S11 662: A NOTE ON THE MSJC 2016 STRENGTH PREDICTION AND DUCTILITY CRITERIA FOR PRESTRESSED MASONRY

Reza Hassanli1, Mohamed ElGawady2, and Julie E. Mills1 1)  University of South Australia e-mail: {reza.hassanli, Julie.Mills}@unisa.edu.au 2)  Missouri University of Science and Technology e-mail: elgawadym@mst.edu Keywords: Rocking response, In-plane, Pre-stressed...

S12 023: FEM ANALYSIS OF MASONRY WALLS REINFORCED WITH TRADITIONAL STRENGTHENING TECHNIQUES

Giulio Castori1, Antonio Borri2, and Marco Corradi2 1)  Dept. of Engineering, University of Perugia, Perugia (Italy) e-mail: giulio.castori@unipg.it 2)  Dept. of Engineering, University of Perugia, Perugia (Italy) {antonio.borri, marco.corradi}@unipg.it Keywords:...

S12 403: THE INFLUENCE OF STRUCTURAL RETROFITTING ON THE DUCTILITY OF UNREINFORCED MASONRY WALLS

S. Dadras1, M.J. Masia2 and Y.Z. Totoev3 1 PhD Candidate, Centre for Infrastructure Performance and Reliability, The University of Newcastle, Callaghan, NSW 2308 (Australia), E-mail: soheil.dadraseslamlou@uon.edu.au 2 Associate Professor, Centre for Infrastructure...

S12 408: EXPERIMENTAL STUDY OF THE IN-PLANE STIFFNESS OF TIMBER FLOOR FOR THE RETROFIT OF URM BUILDINGS

M. Nunes1, R. Bento2 and M. Lopes2 1)  Instituto Superior Técnico, Universidade de Lisboa, Lisbon (Portugal) Av. Rovisco Pais, 1, 1049-001 Lisbon, Portugal e-mail: margarida.nunes@tecnico.ulisboa.pt 2)  CERIS, Instituto Superior Técnico, Universidade de Lisboa, Lisbon...

S12 426: EVALUATION OF THE IN-PLANE SHEAR STRENGTH OF A COMBINED RETROFIT SYSTEM FOR MASONRY WALLS

Ömer S. Türkmen1, Boy T. de Vries2, Simon N.M. Wijte1, and Ad T. Vermeltfoort1 1)  Department of the Built Environment, Section Structural Design, Eindhoven University of Technology, P.O. Box 513, 5600 MB, Eindhoven, the Netherlands. e-mail: {o.s.turkmen, s.n.m.wijte,...

S12 431: CHARACTERIZATION OF BRICK MASONRY: STUDY TOWARDS RETROFITTING URM WALLS WITH TIMBER-PANELS

Jamiu A. Dauda1, Ornella Iuorio2, and Paulo B. Lourenço 3 1 University of Leeds, School of Civil Engineering, UK cnjad@leeds.ac.uk 2 University of Leeds, School of Civil Engineering, UK o.iuorio@leeds.ac.uk 3 University of Minho, Department of Civil Engineering,...

S12 444: TESTING OF MULTI-WYTHE WALLS WITH TRANSVERSE TIES IN VARYING COMBINATIONS AND ORIENTATIONS

Mahmoud El Rayes1 and Nigel Shrive2 1) Research Associate, Department of Civil Engineering, National Research Centre Dokki, Cairo, Egypt, 12622 mh.el-rayes@nrc.sci.eg 2)  Professor, Department of Civil Engineering, University of Calgary, Calgary, AB, Canada, T2N 1N4...

S12 445: URM WALL-TO-DIAPHRAGM AND TIMBER JOIST CONNECTION TESTING

Dmytro Dizhur1, Marta Giaretton2, and Jason Ingham3 Dept. of Civil & Environmental Engineering, University of Auckland, New Zealand 1)  ddiz01@aucklanduni.ac.nz 2)  mgia506@aucklanduni.ac.nz 3)  j.ingham@auckland.ac.nz Keywords: Wall-to-diaphragm connections, URM...

S12 454: EXPERIMENTAL STUDY OF MASONRY WALLS STRENGTHENED WITH EXTERNALLY BONDED STEEL-GRID UNDER ECCENTRIC AXIAL COMPRESSIVE LOADING

M. Molnár1, J. Jönsson1 and E. Gottsäter1 1 Lund University, Div. of Structural Engineering P.O. Box 118, 221 00, Lund, Sweden Miklos.Molnar@kstr.lth.se Johan.Jonsson@kstr.lth.se Erik.Gottsater@kstr.lth.se Keywords: Masonry, strengthening, externally bonded grid,...

S12 528: TRADITIONAL AND INNOVATIVE INJECTED ANCHORS IN MASONRY ELEMENTS: RELIABILITY OF EXISTING DESIGN FORMULATIONS

Francesca Ceroni1, and Marco Di Ludovico2 1)  Engineering Dept., University of Napoli ‘Parthenope’ Centro Direzionale, Is. C4, 80143, Napoli, Italy e-mail: francesca.ceroni@uniparthenope.it 2)  Dept. of Structures for Engineering and Architecture, University of Napoli...

S12 556: AN INNOVATIVE TECHNIQUE FOR CONFINEMENT OF HISTORICAL MASONRY COLUMNS: EXPERIMENTAL RESULTS

Francesco Monni1, Enrico Quagliarini2, Stefano Geminiani2, Mirko Schiavoni2, Marco Tirabassi2, and Stefano Lenci2 1)  AhRTE Srl, Spin Off of Polytechnic University of Marche DICEA – Department of Civil and Building Engineering and Architecture, Polytechnic...

S12 591: DESIGN OF SUPPLEMENTARY INJECTION ANCHORS CONSIDERING WATER ABSORPTION INSIDE MASONRY AND CLIMATE EXPOSURE

Birger Gigla1 1 Dr.-Ing., Full Professor, University of Applied Sciences Lübeck Mönkhofer Weg 239, 23562 Lübeck, Germany e-mail: gigla@fh-luebeck.de Keywords: Strenghtening, injection anchor, design, pull-out test, grouting, water absorption. Abstract. Supplementary...

S12 612: EXPERIMENTAL AND NUMERICAL APPROACH FOR STRENGTHENING MASONRY ARCHES: THE RAM – REINFORCED ARCH METHOD

Lorenzo Jurina1, and Edoardo O. Radaelli1 1)  Politecnico di Milano – ABC Dept. P.za Leonardo Da Vinci 32, 20133 Milano (Italy) e-mail: {lorenzo.jurina, edoardooliviero.radaelli}@polimi.it Keywords: Reinforced Arch Method, Masonry, Experimental Tests,...

SS1 222: CONTINUOUS MONITORING THE CATHEDRAL OF MILAN: DOCUMENTARY AND PRELIMINARY INVESTIGATIONS

Francesco Canali1 and Carmelo Gentile2 1)  Veneranda Fabbrica del Duomo di Milano Via Carlo Maria Martini 1, 20122, Milano, Italy francesco.canali@canaliassociati.it 2)  Dept. of Architecture, Built environment and Construction engineering (ABC), Politecnico di Milano...

SS1 478: THE DUOMO OF MILAN: SOME RECENT INTERVENTIONS ON THE MAIN SPIRE AND ON THE TIBURIO VAULTS

C. Achille1, M. Bocciarelli2, F. Canali3, D. Coronelli4, S. Della Torre5, F. Fassi6 1,2, 5,6)  Dept. of Architecture, Built Environment and Construction Engineering, Politecnico di Milano Piazza Leonardo da Vinci 32, 20133, Milano (Italy) e-mail:...

SS1 575: A STUDY OF THE APSE OF THE CATHEDRAL OF MILAN

Maria C. Giangregorio1, Grigor Angjeliu1, Giuliana Cardani1, and Dario Coronelli1 1Dept. of Civil and Environmental Engineering, Politecnico di Milano Piazza Leonardo da Vinci 32, 20133, Milano (Italy) {mariachiara.giangregorio, grigor.angjeliu, giuliana.cardani,...

SS1 587: ENHANCING A GOTHIC CATHEDRAL WITH 3RD MILLENNIUM TECHNOLOGIES: THE DUOMO DI MILANO

Francesco Canali1, Alfredo Cigada2, Carolina Lucaccioni1, and Lucia Toniolo2 1)  Veneranda Fabbrica del Duomo di Milano Via Carlo Maria Martini, 1 – 20122 – Milano francesco.canali@canaliassociati.it, carolina.lucaccioni@duomomilano.it 2)  Politecnico di...