Mechanical Characteristics of Virgin and Strengthened Old Brick Masonry - Experimental Research
Author
S. KOSMAS and I. CHRISTOS
Civil Engineering Department, Aristotle University ofThessaloniki, Greece
Abstract
The results of an experimental programme concerning the determination of the mechanical characteristics of virgin and strengthened old masonry are presented. Samples of old brick masonry, constructed in 1906, were taken and examined at the Laboratory of R. C. Structures of the Univ. of Thessaloniki. First, specimens of the constituent materials (bricks and mortar) were tested in compression and tension. Then several specimens of virgin masonry were formed and tested in compression (type C specimens), in combined direct shear in joints and compression (type S wallettes) and in combined diagonal and axial compression (type D specimens). Afterwards, another group of type C and D specimens was coated by unilateral or bilateral thin reinforced mortar jacket and tested under the same loading as in the case of the corresponding virgin ones. The main conclusions of the programme are that, as was expected, the constituent materials are rather poor, reveal high scatter and result in a relatively low compressive strength of the virgin masonry; that the strengthening technique used does not increase the compressive strength of the masonry; that increasing the compression in bed joints leads to an increase of local shear strength in joints; that the same "friction" effect is also obvious in specimens tested in combined diagonal and axial compression; and that the strengthening technique used considerably increases the shear strength of the masonry.
Key words
Access to this paper
Members: you need to log-in to access [download] the full paper.Non-members: You can access [download] this document by paying a small fee on-line - but why not consider the benefits of membership?
Price
£ 12.00
*MEMBERS* Login to access the full paper!
Navigation trail:
IMS Home / Publications / Masonry Internati... / Masonry Internati... / Volume 16 / Mechanical Charac...
20081128~EC6 Design Outcomes.pdf